Product Overview

 

XPS tile backer boards are lightweight panels made with an extruded polystyrene (XPS) foam core and reinforced cementitious facings. They provide a substrate for compatible tile installation systems in bathrooms, shower enclosures and other approved interior applications.
XPS Foam Core: Provides a lightweight board structure with thermal insulation properties.
Reinforced Facings: Fiberglass mesh and cementitious surface layers provide the facing structure for compatible tile adhesive systems.
Moisture-Resistant Construction: Suitable for wet-area applications when installed as part of an appropriate waterproofing system.
B2B Supply Options: Standard specifications, customized dimensions and private-label packaging can be evaluated according to product availability and order requirements.

 
  • Wet Room Floor Insulation Backer Boards
    Insulation backer boards may combine an insulating core with reinforced facings designed for compatibility with tile installation systems. The exact construction depends on the product model.
    read more
  • Mold Resistant Wet Room Backer Panels
    Available board constructions may include cement-based boards, magnesium oxide (MgO) boards, or reinforced XPS foam-core composites. The actual core material, reinforcement, surface facing, and...
    read more
  • Wetroom XPS Construction Boards
    Extruded polystyrene (XPS) provides a lightweight foam core with thermal insulation properties and resistance to water absorption. Actual performance depends on the board construction and declared...
    read more
  • Bathroom Waterproof Tile Backer Boards
    Bathroom waterproof tile backer boards are substrates designed for tile installations in showers, bathrooms, wet rooms, and other specified wet-area assemblies. For building-material importers,...
    read more
  • Wet Room Floor And Wall Backer Panels
    Wet room floor and wall backer boards provide a substrate for tiled bathrooms, walk-in showers, and other moisture-prone areas. For building material importers, distributors, contractors, and...
    read more
  • Wet Room Waterproofing Backer Boards
    This guide helps importers, distributors, contractors, and private-label brands evaluate product specifications, verify technical documentation, and prepare bulk purchasing inquiries.
    read more
 
Product Specifications & Selection

 

Technical specifications should be confirmed against the actual product grade and its applicable test reports before ordering.

Parameter

Specification / Confirmation Required

Product Type

XPS Tile Backer Board

Core Material

Extruded Polystyrene (XPS) Foam

Facing Structure

Fiberglass mesh-reinforced cementitious facings; confirm actual construction

Standard Dimensions

1200 × 600 mm and 2400 × 600 mm; confirm availability

Thickness Options

4, 6, 10, 12.5, 20 and 50 mm; confirm available product range

Core Density

Confirm grade-specific value and test report

Compressive Strength

Confirm test value, method and test conditions

Water Absorption

Confirm test result, method and reporting units

Facing Bond Strength

Confirm measured value and applicable test method

Dimensional Tolerances

Confirm length, width and thickness tolerances

Thermal Conductivity

Confirm tested value and applicable conditions

Fire Classification

Confirm classification for the actual board construction

Technical Documents

TDS and applicable test or compliance documents, subject to availability

 

Key Selection Criteria
Board Thickness: Select according to the intended application, substrate support, fixing method and installation-system requirements.
Wall or Floor Use: Confirm whether the selected board grade is approved for the intended wall, floor, bench or curb application.
Tile Compatibility: Check the facing surface and compatibility with the specified tile adhesive and grout system.
System Requirements: Verify installation instructions, waterproofing details and applicable local building requirements.

Applications & Installation Considerations

 

 

Shower Walls & Enclosures: Used as a tile substrate in compatible shower installation systems.
Bathroom & Wet Room Walls: Suitable for approved interior wet-area wall assemblies when installed according to system requirements.
Interior Tiling Projects: Can be considered for renovation, residential construction and commercial fit-out projects where the selected board is suitable.


Waterproofing & Structural Verification
Joint Sealing: Treat joints, corners, penetrations and transitions according to the specified waterproofing system.
Substrate Support: Verify framing spacing, fixing requirements, board thickness and load conditions before installation.
Floor Applications: Do not assume that a wall-grade board is suitable for floors or concentrated loads without supporting technical documentation.
Important: Moisture resistance of the board does not, by itself, establish that the complete installation is waterproof. Overall performance depends on the board, joints, penetrations, waterproofing components and installation workmanship.

 

 

Manufacturing & Quality Control

Product consistency should be demonstrated through defined inspection procedures and product-specific records.

Incoming Material Inspection: Check XPS core and facing materials against approved specifications.

Dimensional Inspection: Verify board length, width, thickness and squareness against agreed tolerances.

Facing Bond Verification: Evaluate facing adhesion using a defined test method and inspection plan.

Batch Identification: Use production lot identification and inspection records where implemented to support traceability.

Technical Verification: Provide applicable product data and test evidence for buyer evaluation, subject to availability.

Mold Resistant Wet Room Backer Panels

 

OEM, Private Label & Customization

Custom Dimensions & Thicknesses

Discuss non-standard sizes and thicknesses according to manufacturing capability and order volume.

Edge Profiles & Panel Configurations

Evaluate options such as tongue-and-groove edges or pre-scored panels where available.

Private-Label Packaging

Discuss carton printing, packaging artwork and product identification requirements.

Sample Evaluation

Request representative samples and technical documentation to assess facing quality, adhesive compatibility and intended application before bulk purchasing.

 

Export Packaging & Bulk Supply
 

Protective Packaging

Confirm suitable packaging and edge protection for the selected board dimensions and transport method.

Pallet Configuration

Determine pallet material, loading arrangement and shipment quantities according to product dimensions and destination requirements.

OEM Identification

Align carton labels, product markings and packaging specifications with the buyer's requirements.

Export Documentation

Confirm the availability of commercial invoices, packing lists, certificates of origin and applicable technical documents according to the contract and destination market.

 

 

Frequently Asked Questions

 

 

Q: What is the difference between XPS tile backer board and standard XPS insulation board?

A: XPS tile backer board incorporates a facing construction designed for compatible tile installation systems. Standard XPS insulation board may not have a suitable surface for direct tile bonding. Confirm the intended application and facing specifications before selecting a product.

Q: Can XPS tile backer board be used in showers and wet rooms?

A: It can be used in compatible wet-area systems when the board is approved for the application and installed according to the specified waterproofing and sealing requirements. Verify the complete system details before installation.

Q: Can the board be used for both walls and floors?

A: Not every board grade is suitable for both applications. Floor use requires confirmation of the board's structural suitability, substrate support, fixing method and intended loading conditions.

Q: Which board dimensions and thicknesses are available?

A: Standard and customized options may be available depending on the product range. Specify the required dimensions, thickness, edge profile and application when requesting a quotation.

Q: What technical documents can be supplied?

A: Request the current Technical Data Sheet (TDS), relevant test reports, installation instructions and applicable compliance documents. Availability and applicability should be verified for the selected product and destination market.

Q: Do you support OEM orders and product samples?

A: OEM packaging and customized specifications can be discussed according to manufacturing capability and order quantity. Buyers should confirm sample availability, minimum order quantity, lead time and artwork requirements before placing an order.

 

modular-1
Request a Bulk Quotation

Provide the following information to support product selection and quotation:

Application: Shower walls, bathroom walls, commercial fit-out or another intended use.

Specifications: Required dimensions, thicknesses, facing construction and performance criteria.

Quantity: Sample requirement, initial order volume and estimated annual demand.

Destination: Country, delivery location and preferred shipping terms.

Customization: Edge profiles, panel configurations, packaging and private-label requirements.

Technical Documents: Required test reports, product data and destination-specific compliance documentation.

Request a quotation with your target specifications and application details to confirm product suitability, available configurations and bulk supply options.

 

As one of the leading manufacturers and suppliers of wet room backer board in China, we're featured by quality products and good service. Please rest assured to buy advanced wet room backer board for sale here from our factory. We also accept customized orders.

Send Inquiry